MakerWorld

Animals

Low "The Frog" Poly

by ilmanu · Animals

40 Downloads

16 Likes

35 Makes

Go to Model

Another fast print animal in lowpoly, 1h printing Enjoy!! Boost MeDon't let your boost expire, give me one XD

miniature miniatures frog animal animals low poly lowpoly low poly fastprint fast print a1 x1c A1Mini frog art

Category

Animals

Source

MakerWorld

Published

10.10.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Low "The Frog" Poly need supports when printing?

Yes, Low "The Frog" Poly will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Low "The Frog" Poly?

According to the design notes, Low "The Frog" Poly takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Low "The Frog" Poly available in?

Low "The Frog" Poly is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Low "The Frog" Poly free to download?

Yes, Low "The Frog" Poly is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Low "The Frog" Poly

Similar Models

Add to Collection