LP Wall Mount

# LP Wall Mount



Long story short, my sister gave two painted LPs.
So I decided to design a simple wall mount for them.



### Description

The whole mount can be installed to a wall by using a small nail or a small srew.
Please mind, the head of the nail or screw shouldn't be thicker than 1.2mm.

Also, you need ***1 additional M3x6 screw*** to fit the two parts together. Where the thread length is 6mm.

STEP files of the parts are also available on my [Github Page](https://github.com/TobiasLibera/LPWallMount), so it should be easy to modify the parts to your needs.



### Before Printing

Before printing, I recommend to print the ***LPW_Test_ScrewHole_M3*** part once, to check if you can tighten the M3 screw into the screw hole.
The nominal diameter of the hole is ***2.93mm***, which works good for my printer and my slicer settings. Maybe you need another value to get a good fit. Feel free to modify the STEP files.



### Printing Times

With my settings