Luffy Gear 5 HueForge

As I got some requests, I want to share with you the Luffy Gear 5 HueForge print I made. The print is rather complex and consists of multiple single print which are glued together afterwards. Instructions for each single print and the filaments I used for each of them are listed below. I also prepared print profiles for each single print. Feel free to use them and adjust the filaments to the ones you have or want to use. Happy printing!_________________________Print 1: Back Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA+ Sunlu Grey Transmission Distance: 2PLA+ Sunlu White Transmission Distance: 5Swap Instructions:Start with CharcoalAt layer #6 (0.56mm) swap to GreyAt layer #10 (0.88mm) swap to White for the rest. Print 2: Belt Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA+ IIID Ma