MakerWorld
Hueforge & Lithophane
Go to Model
Luffy Gear 5
78
Downloads
87
Likes
23
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 129.29x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2mm Filaments Used:PLA BmbuLab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Purple Transmission Distance: 2.6PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic White Transmission Distance: 6This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions:Start with BlackAt layer #3 (0.32mm) swap to Purple At layer #5 (0.48mm) swap to Beige At layer #7 (0.64mm) swap to Purple At layer #14 (1.2mm) swap to BeigeAt layer #20 (1.68mm) swap to White for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
