LUFFY ONE PIECE HUEFORGE

FILE IS READY TO PRINT I UPLOADED 2 PRINT PROFILES, CHOOSE WITH OR WITHOUT FRAME Project: FRAMED.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 192.21x240mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 1.5mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA ERYONE MANGO Yellow Transmission Distance: 8PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to RedAt layer #10 (0.88mm) swap to mango YellowAt layer #14 (1.2mm) swap to Jade White for the rest. Reminder:My models mostly cover the entire bed,this means the purge line is sometimesrunning through the bottom of the print.You have 3 options here:- Leave as is, you can just cut them of afterwards.- Remove immediately after the purge line is printed.-