Luffy One Piece

Project: One Piece LuffyPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 1.6mmFilaments Used: PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 6 unique filamentsSwap Instructions: Start with Sakura Pink At layer #4 (0.4mm) swap to Black At layer #8 (0.72mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #14 (1.2mm) swap to Ice Blue At layer #16 (1.36mm) swap to Ivory White for the rest.