Luffy Pose Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x137.5mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #d1d3d5 PLA BambuLab Basic Light Gray Transmission Distance: 1.7 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Light GrayBorder Only Colors from here until the end. At layer #20 (1.68mm) swap to Jade White for the rest.