LUFFY5_HUEFORGE

NOTE: If you change its size, manipulate it without changing the z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 4.1 PLA BambuLab Basic Red Transmission Distance: 4.7 PLA BambuLab Basic Yellow Transmission Distance: 8.4 PLA BambuLab Basic Jade White Transmission Distance: 4.4Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #17 (1.44mm) swap to Jade White for the rest.