Lugia Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.08x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2.31997mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #12 (1.04mm) swap to Cyan At layer #16 (1.36mm) swap to Turquoise At layer #21 (1.76mm) swap to White for the rest.