Lugia Hueforge

DO NOT CHANGE THE Z-HEIGHT. For ease of use, i suggest unchecking the “UNIFORM SCALE” and change X and Y Percentace only when editing size; Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Matte Marine Blue Transmission Distance: 0.5PLA BambuLab Matte Ice Blue Transmission Distance: 3.5PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions:Start with CharcoalAt layer #11 (0.96mm) swap to Marine BlueAt layer #19 (1.6mm) swap to Ice BlueAt layer #21 (1.76mm) swap to Ivory White for the rest.