Luna Moth

Be careful around the antennae when removing from the plate. I recommend using scraper to free them up gently. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Brown Transmission Distance: 2PLA BambuLab Matte Grass Green Transmission Distance: 2PLA+ Numakers Pure White Transmission Distance: 4.8PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 5 unique filaments Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to BrownAt layer #11 (0.96mm) swap to Grass GreenAt layer #13 (1.12mm) swap to Pure WhiteAt layer #17 (1.44mm) swap to YellowAt layer #20 (1.68mm) swap to Pure White for the rest.