Lunging Elephant

Remixed a single model into a pose I wanted. I flipped the model 180 to save on filament.
It is a little head-heavy, though small amounts of sanding the front left side of the model have fixed it.

Printed on a wanhao clone; the monoprice maker select plus

I printed it with colorfab bronzefill at:
-Print speed: 50 mm/s
-Extruder temp: 205C
-Bed temp: 0C with green painters tape
-With a brim + supports
-Flow at 104%
Picture is "as is" and not cleaned up at all.