Note that the little clips are smaller on the top of the button (top is marked "TOP"). Print with supports on baseplate. Since it is a small part, I used a 0.25mm nozzle.
Source
Thingiverse
What you need to print this:IntermediateMedium confidence
Why?
supports needed
Single pieceSupports required
Supports2/3
Assembly0/3
Settings1/3
Bed size0/3
Post-process0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Est. print time
2 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Lutron Movement Sensor Switch MS-OPS2H Button Replacement need supports when printing?
Yes, Lutron Movement Sensor Switch MS-OPS2H Button Replacement will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
How long does it take to print Lutron Movement Sensor Switch MS-OPS2H Button Replacement?
According to the design notes, Lutron Movement Sensor Switch MS-OPS2H Button Replacement takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Lutron Movement Sensor Switch MS-OPS2H Button Replacement available in?
Lutron Movement Sensor Switch MS-OPS2H Button Replacement is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is Lutron Movement Sensor Switch MS-OPS2H Button Replacement free to download?
Yes, Lutron Movement Sensor Switch MS-OPS2H Button Replacement is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
Did you print this model? Sign in and share your make!
Thingiverse