Lyft Driver USB Powered Lightbox w/ Window Mounts

Lyft Driver USB Powered Lightbox with Window MountsBecause this would be used in a vehicle it is strongly recommended to print in ASA, ABS or PETG. PLA is not recommended and will melt/warp in the sun. Back plate / lidThere are 2 lid options for the back, depending on your preference. One is a simple lid with holes to use threaded screws (printed or otherwise) and the other has plastic pegs that will hold it in place with friction. Only one lid is needed. PowerIf using a USB battery pack you can store it inside the lightbox itself. In this case, print 3 “Box Light Plugs” and plug each of the outlet holes on the sides and back. If using a wired connection, run the cables through the desired hole and plug the others with the “Box Light Plugs”Lighting OptionsThe backlighting I used was a cheap USB powered LED light strip from Amazon (link below). This is only one option, feel free to use any backlight source you prefer. The light strip I linked is easy to install and only $7 per strip (at