Thingiverse
M3 T-Nut 5mm
by AlexSwensen
43
Downloads
28
Likes
0
Makes
**If you find this part useful, please leave me a tip and/or a comment saying how it was helpful/how it can be improved. :-)**
Modeled this after needing some M3 T-Nut's with a 5mm width for my AM8. The extrusions only had a 5mm width unless i wanted to slide in the nut from the end of the extrusion.
**Note: If you need the M3 nut to fit directly in the slot (not slid from the end) you will have to sand/grind it first.** The ones I used have an outer-diameter of 5.5mm.
I have included a copy of the model for anyone who is interested.
I plan to improve this with a self-locking version for 5mm slot extrusions soon.
Modeled this after needing some M3 T-Nut's with a 5mm width for my AM8. The extrusions only had a 5mm width unless i wanted to slide in the nut from the end of the extrusion.
**Note: If you need the M3 nut to fit directly in the slot (not slid from the end) you will have to sand/grind it first.** The ones I used have an outer-diameter of 5.5mm.
I have included a copy of the model for anyone who is interested.
I plan to improve this with a self-locking version for 5mm slot extrusions soon.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
