M4 Mac Mini - Vertical Wall Mount

UPDATE 2 (04/06/2025): V.2 is live, this version improves the security of the back plate mount with a cross brace on the upper surface - doesn't interfere with cables and uses the same mounting spacing as V.1 (e.g. the large tolerance V.2 Mac Mini Holders are compatible with large tolerance V.1 backplates, and the same for the smaller tolerance models - the original model (pre-03/06/2025 version) was a small tolerance spacing model).UPDATE 1 (03/06/2025): Please note the revision in print profiles, now there are two versions of the print profile - a tight tolerances version that works on my X1C and generates a snug fitting mount, and a higher tolerances version that may be more suitable for an unenclosed printer and is less likely to run into fitting issues (thanks to @WojciechKawa for their feedback printing using an A1 Mini). The designs are the same in both profiles, just a very slight scaling factor increase to bring the tolerances from 0.6mm to 1.5mm respectively. Please choos