M93p tiny SSD caddy
door RasenSurfer
8
Downloads
4
Likes
0
Makes
I got a cheapo cheap littel tiny Lenovo M93p Tiny computer fresh and heavily used from ebay without HDD (was announced) - but without the HDD-caddy (not announced); I had to construct a caddy myself.
Attention: It was a one shot construction - so the print needed some additional holes drilled in it. If you look at the pictures - you'll perhaps see it. Also M4 nuts were used as spacers on the screw posts to level the SSD mount.
The little thing is running fast with the SSD attached to it.
Attention: It was a one shot construction - so the print needed some additional holes drilled in it. If you look at the pictures - you'll perhaps see it. Also M4 nuts were used as spacers on the screw posts to level the SSD mount.
The little thing is running fast with the SSD attached to it.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!