Mac Mini (Intel) Mount for sheetrock screws

Use both STLs to mount a Mac Mini to a board. It's possible to use nuts and bolts on this but I made the screw holes to countersink an appropriate screw. I'm using #8 3/4" sheetrock screws into a pine 2x6 that serves as one of the legs on my electronics workbench. You don't need to use all 8 screws if mounted to a pine board. The Mac Mini is not that heavy. But if you are screwing into composite board, you might want as many screws as possible.

The original designer, ampxtreme, left a 6mm tolerance gap so FELT could be adhered to the mounts, saving the Mac from scratches. My needs didn't include preserving the Mac body so I removed that tolerance.

The Mac is held well so it can only come out one end of the structure, but for my purposes, it can't slide out the open end. I have the connectors facing slightly up so if I plug something in, the Mac won't come off the bracket. If you are placing this level so tugging a cable could pull the Mac out of of the bracket, you might