Mac mini M4 (2024) Mount

This mount is designed for the Mac mini M4 (2024), utilizing the rounded shape of the case for a compact fit. It does not increase the device's footprint, only raising it by about 1.5 mm to improve heat dissipation from the top. The mounting screws are hidden, and the power button is more accessible while retaining its satisfying click.The mount is symmetrical, allowing flexible installation direction. Recommended material is standard PLA or PETG. Use 4× M3x19 screws and 4× small wood screws (approx. 3×15 mm) for table attachment. Clean holes for nuts before assembly; nuts can be glued but ensure screw holes remain clear.For best results, print with 0.2 mm layer height and 20% infill. No supports are required. Clean filament residue from nut holes before inserting nuts. Required Materials- Screws 4x M3x20mm + 4 nuts- Wood screw 3x15mm Step 1: Clean holes for nutsOn the bottom part, clean the holes for nuts (remove any excess filament).Step 2: Insert nutsInsert nuts into the prepare