Madruga

Project: só para ti.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 259.7x313.69mm in sizeYou may print at higher layer heights below the Base Thickness of 1.04mmThe Max allowed Thickness is 2.88mm and the Actual Thickness is 2.4mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #757575 PLA BambuLab Matte Nardo Gray Transmission Distance: 0.7 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with PolyLite Black At layer #15 (1.36mm) swap to BambuLab Basic Blue Gray At layer #18 (1.6mm) swap to BambuLab Basic Red At layer #19 (1.68mm) swap to BambuLab Matte Nardo Gray At layer #22 (1.92mm) swap to PolyLite White for the rest.Boost Me