MakerWorld
Hueforge & Lithophane
Voir le modèle
Maggie Simpson Keychain
1
Téléchargements
4
Likes
0
Makes
Please consider sending me a like or and a boost! :) Project: Maggie STL.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x194.95mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Boost MeThank you for helping me create more fun stuff! Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA+ Sunlu Sky Blue Transmission Distance: 4 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Dark Red At layer #13 (1.12mm) swap to Sky Blue At layer #17 (1.44mm) swap to Pure Yellow *PAUSE during yellow. Change Black to White. At layer #22 (1.84mm) swap to Ivory White
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
