Maghex Astronaut hueforge

Wall Art intended for the Maghex system by the user SuperseaslugIf you want to like/boost then please do it on his works. Since i only include the .stl you need to use his files anyways so be sure to follow his tutorial. Project: astronaut.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.08mmThe Model is 216.44x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.16mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA Bambulab Purple Transmission Distance: 1.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 4.8 PLA Bambu Bright green Transmission Distance: 4.8 PLA Kingroon White Transmission Distance: 8This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #4 (0.3mm) swap to Purple At layer #10 (0.8mm) swap to BambuLab Green At layer #15 (1.2mm) swap to Bright green At layer #19 (1.52mm) swap to White for the rest.