Maghex Perfect Set Magnet Jig

I highly recommend reading this Summary on (https://www.printables.com/model/287733-maghex-perfect-set-magnet-jig) due to the formatting.

V1.2:

-Increased depth of magnet recess in Bottom Jig to make the magnet sit flush, instead of protruding

v1.1:
- I noticed that the magnets tended to go perpendicular in the channel when the magnet count got low. I've added a top stopper to each channel to prevent this.
- Widened the holes in the top jig for the alignment magnets. They will now need to be glued into place as I found the alignment post were too fragile and kept breaking.
- Update width of alignment posts. The magnets should now no longer stick out towards the center.

=================================================================

Introducing the maghex magnet set jig. You want this, no, you need this if you're getting into the maghex system. Make your life easier and reduce the hardest and most annoying part of the system (setting the magnets) down to a trivial ~