Thingiverse
Magic Angle Sculpture "Maufante"
di ICSE
3
Download
4
Likes
0
Makes
This is a Magic Angle Sculpture created by Dr. Rahel Brugger at the ICSE in Freiburg.
To see it in action watch https://youtu.be/z6RG9X-RhWM
It can easily be printed using PLA or other common filaments.
We recommend to scale the figure in a range between 75 % an 100 % using support material.
The figure seen on the picture and in the video was printed at 80% size, so that a threaded rod with 3 mm diameter could be used as axis.
The best results should be obtained with an angle of 35° between axis and projection plane.
To see it in action watch https://youtu.be/z6RG9X-RhWM
It can easily be printed using PLA or other common filaments.
We recommend to scale the figure in a range between 75 % an 100 % using support material.
The figure seen on the picture and in the video was printed at 80% size, so that a threaded rod with 3 mm diameter could be used as axis.
The best results should be obtained with an angle of 35° between axis and projection plane.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!