Magic Wand Holder

This will mound a magic wand to a standard 1" iron pipe. This will need 4x M4 30mm screws and 4x M4 nuts. It is possible that 25mm will work but prefer 30mm for easier assembly. I designed this to use socket head screws, however, other heads should work

Using a 30mm screw you can drive them through the holes and thread the nuts on the other side. Continuing to thread the screw tight should pull the nut into the socket.

To mount the wand itself simply slide it into the larger tapered hole. Once secured with the screws the wand will not move. I found that even just a few turns are good enough.