Thingiverse
Magnet and string lamp
door maschlue
60
Downloads
46
Likes
0
Makes
A Lamp which can be turned on by moving two magnets close to each other.
Needed parts:
* 3D printed parts, see attached STLs.
* 12V Power supply
* 12V LED Strip
* End Stop Switch or "Micro Switch" with roller
* 2 pieces of string
* some wire
* 2 Magnets in cylindrical form: D=10mm, L=5mm
* M3 Nuts and Bolts for mounting the microswitch.
The main case parts need to be glued, I used "UHU Allplast" glue for plastics. You can use short lengths of filament to align all parts.
This micro switch would work:
https://www.amazon.de/Unbekannt-St%C3%BCck-Mikroschalter-Wechselschalter-polig/dp/B00BXHN0J2/
Needed parts:
* 3D printed parts, see attached STLs.
* 12V Power supply
* 12V LED Strip
* End Stop Switch or "Micro Switch" with roller
* 2 pieces of string
* some wire
* 2 Magnets in cylindrical form: D=10mm, L=5mm
* M3 Nuts and Bolts for mounting the microswitch.
The main case parts need to be glued, I used "UHU Allplast" glue for plastics. You can use short lengths of filament to align all parts.
This micro switch would work:
https://www.amazon.de/Unbekannt-St%C3%BCck-Mikroschalter-Wechselschalter-polig/dp/B00BXHN0J2/
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
