Slicer Discord
Magnet Cable Path Guides – 3D-printbaar model van MakerWorld MakerWorld
Electronics

Magnet Cable Path Guides

2 Downloads
2 Likes
0 Makes
Model downloaden
Optimized for low-voltage installations, these guides come in two primary sizes and clip gaps. Size Options: Small: 13mm internal diameter capacity. Large: 21.8mm internal diameter capacity. Clip Gap Variations: Tight Fit: 3.4mm opening. Loose Fit: 5.0mm opening. Requires 15x3mm magnets listed in the BOM if you get them through Bambu Lab. They are also available on Amazon: https://www.amazon.com/dp/B0CCXT3M7Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 I made these with a specific project in mind but will make variations and improve functionality as the need arises over time. They are not intended to make a strong connection in high traffic areas and do not replace hard points, but rather a path guide between hard points in a zero traffic area.
Categorie
Electronics
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie