Magnetic cable clip (parametric)

This is a simple magnetic cable clip I made for my desk setup.I've shared the design file so you can easily change the parameters in Fusion360 for it to suit your cables & magnets.The design shared here is for a 9mm wide and 1mm thick magnet, with a 3mm cable diameter.The parameters available for modification are:The cable diameterThe cable diameter tolerance (set at 0.2mm)The magnet diameterThe magnet diameter tolerance (set at 0.2mm, you can play with that for the magnet to fit tightly if you don't want to use any glue)The magnet thicknessThe shell (set at 1.5mm)The arc (the curves on the top) is a function of the overall diameter (magnet, tolerance and shell). But you could also change that if you wanted to.