Slicer Discord
Magnetic Car Stand – 3D printable model from MakerWorld MakerWorld
Sport & Outdoors

Magnetic Car Stand

1 Downloads
0 Likes
0 Makes
Go to Model
Tired of laying your bike expensive side down for the post ride beer, or as you gear up? Need a way to keep things upright? This is a magnetic car/truck/van bike stand with holes for a bungee cord. I have included two versions, one that will fit most bikes and a MTB specific version that is better at accommodating wider tires. The one shown in the photo is the all bike model. There is also a TPU cover so you don' scratch your paint that you can glue over the magnets. I have found a thin (1/16th inch) rubber cover works better (provides more grip). The magnets are 1.26 inch x 1/8 inch neodymium like these https://www.amazon.com/dp/B072KDBJWC?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1. There is a secret message on the inside of the stand to help keep your priorities straight. The stand functions better if placed as seen in the photo. THIS IS ONLY MENT TO BE USED WHEN THE VEHICLE IS STATIONARY. PLEASE USE COMMON SENSE AND REMEMBER ALL YOU MOUNTAIN BIKERS…… “SAFETY THIRD”
Category
Sport & Outdoors
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
significant post-processing
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 3/3
Printer
FDM / FFF
File format
STL
Material
PLA, TPU
Post-processing
Painting, Gluing, Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection