Magnetic Connector

Magnetic Connector

To magnetically connect 2 pins.

Requirements
1. 4 10 x 10 x 3mm or 8 10 x 5 x 3mm neodymium magnet.
2. Thin sheet of metal thickness of 0.3 ~ 1.0mm.
3. Pliers for accurate metal bending.
4. Wires.

Magnets
10x10x3mm neodymium magnet
https://www.amazon.com/30-Piece-10x10x3mm-rectangular-refrigerators-whiteboards/dp/B07G13MYVK/ref=sr_1_28?crid=190GS07K30YOB&dchild=1&keywords=magnet+10mm+x+3mm&qid=1609115335&sprefix=magnet+10mm+%2Caps%2C197&sr=8-28

10x5x3mm neodymium magnet
https://www.amazon.com/RUTILISM-10%C3%975%C3%973mm-curtain-screen-refrigerator/dp/B07TB6J7JD/ref=sr_1_40?dchild=1&keywords=magnet+10mm&qid=1609210587&sr=8-40

Sheet Metal
I use an scrap air vent metal witch is solderable.

Steps
1.Cut metal to the indicated pattern.
10x10x3mm : https://easel.inventables.com/projects/lYaNe-_WVjVV-co6GR4LgA
10x5x3mm : https://easel.inventables.com/projects/-c1JPaECJlbYmpCgISItpw
you can use a small cnc router or manually cut the dimensi