Magnetic Door Stop

Magnetic Door StopThis is a door stop that you can attach to a door and the wall behind it to keep it closed. It is a very easy print. You will need supports for this. I would say put the holes for the magnets on the top in your slicer. This print uses 3x6mm magnets. These are the magnets that I used (you can also get them off of the Bambu website):6x3 Magnets Once you remove the supports, you should just be able to push the magnets into the holes. Make sure they are in the right direction so they attract to each other.Next just add double sided tape onto both peices. Attatch one side to the door, then connect the magnets. Lastly close the door so it attaches to the door.