Magnetic Mounter

打印前请认真阅读本说明 Please read this instruction carefully before printing 1.工具功能 Function Design有很多时候，我们都需要在打印件上安装磁铁。而有很多打印件所使用到的磁铁规格较小（类似CA001的4x2磁铁）。一方面，磁铁孔大小受限，另一方面，磁铁本体体积较小。我们很难很好地用手把磁铁平放入磁铁孔内并压实。因此，我设计了该工具，辅助打印过程中或打印后在其他3D打印件上放置磁铁。There are many occasions when we need to install magnets onto printed parts. Often, the magnets used are quite small (such as a 4x2 magnet similar to CA001). On one hand, the magnet hole size is restricted, and on the other, the magnet itself is small. It’s difficult to place the magnet flat into the hole and press it firmly by hand. Therefore, I designed this tool to assist in placing magnets on other 3D printed parts, either during or after the printing process.除常规放置磁铁外，我曾打印过一个汽车换挡器模型。那个模型需要安装大量磁铁且对磁铁磁极方向有要求。通过我设计的这个安装器，能够利用斜角的两个方向，轻松区分磁极方向。In addition to placing magnets in the usual way, I once printed a model of a car gear shifter. This model required installing multiple magnets with specific orientations for the magnetic poles. With this placer I designed,