Magnetic Needle Case

# Magnetic Needle Case

A simple case with embedded magnets to hold your sewing needles for that occasion when you need to take your handwork with you. There are two variations: a two part case with separate top and bottom, and a one piece with a print in place hinge. There are embedded bar magnets (20mm x 8 mm) to hold the needles and pins, and cylinder magnets (7mm x 3mm) to hold it closed.

## Updated (25/Oct/2025)
Added a version of the 2 piece Foxy case (separate top and bottom) for 20x10x2 magnets. Requires 5. I don't have magnets of this size and have not tried printing it with them. You will need to glue the magnets in mid print as there are no longer any tabs (on the 20x10x2 magnets) to hold them in place. Circular magnets have been resized to 7x3 to accommodate a slightly wider range of sizes (I have 7x2.5, others have 6x3...). These will need glue as well.

If you intend to print this, I recommend printing the magnet test for 20x10x2 (also just added) to make sure t