Magnetic PTFE Splitter Mount

DESCRIPTION It turns out that Bambu Lab (BL) has two 4-way PTFE pneumatic splitters in their store. The grey one and the clear black one. Functionally they are the same, but in-use, the clear black is so much easier to reconnect if you reconfigure your PTFE set-up. I’ve moved exclusively to the clear black splitters. To keep the tubing relatively neat, I designed this magnetic mount to serve the purpose. In-practice, the mount fits to the back of the H2 Series printer and is held in-place with strong magnets. It’s also possible to use two of these mounts in parallel (for H2D and H2C). ASSEMBLY I used two Neodymium magnets to hold the mount in-place. The magnets are 10x5x2mm in size. I glue the magnets in-place with Super Glue (CA glue). The magnets are positioned into the printed slots. See image … The mount is made from two 3D printed parts held together with two screws … The two screws used are 3mm diameter and 8mm long. As can the CB002 magnets, the screws can be found in the Maker