Magnetic Saber - Straight

Whatever you do, don't drop this perfectly vertical! This magnetic saber is a fun 3D print where you can have it go through ANYTHING! Two halves of this give the effect of the saber going completely through an object. Can be used on anything magnetic. Multi-color printer not required, you can print each part separately. Only the top blob shell requires supports. Everything else can be printed without supports. The Insert of the blob make a red color and the outside yellow to give a temperature transition effect.   Superglue and some magnets are required. You may need to glue the magnets. Make sure all magnets are facing the same direction when you install them. I also suggest you glue them one at a time as the magnets in close proximity can come out of the hole and you don't want flying superglue everywhere. Ask me how I know. :) These are the magnets I used https://amzn.to/46xsvLS and some dollar store super glue. When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.