Magnetic Slider Fidget

This is a simple magnetic slider fidget made from three 3D printed parts: the housing, the slider, and the lid. The slider moves back and forth inside the housing and is held in place by neodymium magnets, which create a satisfying magnetic resistance.The model is small, easy to print, and designed to be a simple pocket fidget. You can pause the print to insert the housing magnets, or install them after printing depending on your preference.I used 5×3 mm neodymium magnets. There is also an optional third magnet slot in the middle of the housing that repels the slider, which makes the movement a bit harder and more satisfying.ASSEMBLYPause the print at layer 60 to insert magnets.Make sure you are inserting them the right way!You only need to pauze once for the “Hausing” magnets - you can put the magnets for the slider after the print.I used 5mm x 3mm NEODYM Magnets. There is a third hole in the "Hausing" in the MIDLE - it is for an optional magnet thet will REPEL the "Slider