MakerWorld

Organizers

Magnetic Storage Basket

by 大东 · Organizers

76 Downloads

19 Likes

40 Makes

Go to Model

磁吸收纳篮，可以贴在冰箱或者其他金属表面。无支撑打印。共需4颗10*3mm的磁铁。打印至75层和275层时会自动暂停，每次暂停放入两颗磁铁。当然也可以不安装磁铁使用，切片时把暂停去除即可。篮子尺寸：100*60*60mm为我助力

Magnetic attraction Magnets 10x3 Storage 篮子 Refrigerator Magnet Practical No Supports kitchen Home use

Category

Organizers

Source

MakerWorld

Published

04.12.2024

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece Hardware needed

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

100 mm (Medium)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Magnetic Storage Basket?

Any FDM printer should handle Magnetic Storage Basket just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 100 mm is recommended.

Does Magnetic Storage Basket need supports when printing?

No supports needed for Magnetic Storage Basket — it's designed to print clean off the bed.

What file format is Magnetic Storage Basket available in?

Magnetic Storage Basket is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Magnetic Storage Basket free to download?

Yes, Magnetic Storage Basket is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Magnetic Storage Basket

Similar Models

Add to Collection