Thingiverse

Maker Coin

von 3DTinkerers

2 Downloads

1 Likes

0 Makes

Hey, The maker coin is a dual-color coin. It contains 2 parts, the bottom part that snaps into the top! If you're not familiar with the "Maker Coin" it's a coin that different Makers and Tinkerers create to test filament. For more info, you are welcome to check out @Makers Muse's channel. Here is a link that will explain exactly what a Maker Coin is: youtube.com/watch?v=ZlnNCyigTec .This particular maker coin contains my logo and because of its color, I decided to print it in Blue and White.

I printed it in 0.16mm layer height with a 0.4mm nozzle and at 60mm/s, it needs no support!

Thanks

Steve

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Mittlere Konfidenz

Warum?

keine Supports · 2-teiliger Zusammenbau · 0.16mm Schichten

Ohne Supports

Supports 0/3

Zusammenbau 1/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA, PETG

Schichthöhe

0.16 mm

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Maker Coin

Zur Sammlung hinzufügen