MakerChip Template - NFC Tag - 2 Half Split Print

I have seen the interest in creating your own MakerChip which I designed a few but was not a fan of the top side not looking as nice from the print process. Therefore I created a 2 Half (split) MakerChip in which you print with both sides faced down to get a real nice finish. The void is a great fit for a standard NFC tag. Then add 3 small drops of plastic glue in the provided groove - 120 degrees part. This is a blank template which allows you to add your design to each side. The thinnest section in each half is 1.2mm so stick to a max of 0.6-1mm recess for your design. Please share what you created as would love to see what you guys are making with it. I have included the STEP Files so you can import into your program and modify. Once glued you have to look for the join and you would very easily miss it. I added 2 photos of what lloks to be the same chip of the same side but it is a photo of each side. In addition there is another image of my makerchip design Swinks Pinball (S and pi