Thingiverse
Makersome Donut
door Makersome
41
Downloads
37
Likes
0
Makes
DONUTS who doesn’t like Donuts.
Instructions:
1. Download the STL file for the Donut
2. Pop it into your slicer of choice.
3. We recommend using PLA with extruder setting of 200°C
4. If you do not have a Glass Bed Upgrade Kit then we recommend not to use a heated bed, but if you do have the Glass Bed Upgrade Kit then we recommend using a bed temp of 70°C
5. Print with 20% infill. You will need to use rafting and supports while printing this project
6. Load your project onto an SD card or connect your computer to your printer (just use your preferred method here)
Congratulations, you're ready to print!
To see the project for this download:
http://makersome.com/project/makersome-donut/
To checkout our Youtube Channel:
https://www.youtube.com/channel/UCv00IAervOUnsipGhwTC9rA
Instructions:
1. Download the STL file for the Donut
2. Pop it into your slicer of choice.
3. We recommend using PLA with extruder setting of 200°C
4. If you do not have a Glass Bed Upgrade Kit then we recommend not to use a heated bed, but if you do have the Glass Bed Upgrade Kit then we recommend using a bed temp of 70°C
5. Print with 20% infill. You will need to use rafting and supports while printing this project
6. Load your project onto an SD card or connect your computer to your printer (just use your preferred method here)
Congratulations, you're ready to print!
To see the project for this download:
http://makersome.com/project/makersome-donut/
To checkout our Youtube Channel:
https://www.youtube.com/channel/UCv00IAervOUnsipGhwTC9rA
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
