Makima 03 Hueforge

Project: Makima 03.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 149.68x234mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.88mm and the Actual Thickness is 2.72mmFilaments Used: (* = Owned) #000000 * PLA BambuLab Basic Black Transmission Distance: 0.1 #4c5f71 * PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ffffff * PLA BambuLab Basic Jade White Transmission Distance: 5.8 #fce300 * PLA BambuLab Basic Yellow Transmission Distance: 5.2 #c00d1e * PLA BambuLab Basic Red Transmission Distance: 3.7This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #13 (1.12mm) swap to Jade White At layer #15 (1.28mm) swap to Black At layer #16 (1.36mm) swap to Yellow At layer #17 (1.44mm) swap to Red At layer #19 (1.6mm) swap to Jade White At layer #23 (1.92mm) swap to Red At layer #24 (2mm) swap to Yellow At layer #26 (2.1