Makima - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.52x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #e8e6d0 PLA PolyLite Natural Transmission Distance: 21 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Natural At layer #13 (1.12mm) swap to Red At layer #16 (1.36mm) swap to Yellow At layer #17 (1.44mm) swap to Beige At layer #26 (2.16mm) swap to White for the rest.