Maleficent style staff

Updated Nov 27th 2025
Added a flexible strip led mount that can be glued in place of the torch lens, giving a better light. The 5 volt LED strips can be bought on a roll and can be cut to lengths of 50mm (2 inches) this can be soldered as shown and wrapped around the curved surface of the new adapter.
I will take a picture of the LED part in place when I get the wand back from the production... Yes it's been used a few times now...

This is a staff I made for a show.
The body can be drilled to fit whatever size led's you want to fit.
The handle holds the battery pack and switch.
The body and handle can be screwed together with 3 small screws, recessed holes are in the bottom of the handle. No screw holes are in the body as I'm not sure what size screws will be used , so you'll have to line them up and drill yourself
The handle should fit a 1 inch pole.
I made the light from a cheap pound/dollar store aluminium torch, I cut the top part off about an inch from the led's, I soldered