Mandala Lion Hueforge

Project: Mandala Lion Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180.5x180.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm MY PRINT PROFILE IS ALL SET UP AND READY TO PRINT This print uses 4 unique filaments Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 Swap Instructions:Start with Black At layer #9 (0.8mm) swap to Gray At layer #14 (1.2mm) swap to Green At layer #18 (1.52mm) swap to Yellow for the rest.