Mandalorian Elmet KeyChain

📸 Mandalorian Helmet Keychain – "Print By Object" Edition Carry the Way of the Mandalore wherever you go! This helmet keychain isn't just an iconic accessory; it's a perfect project to test your printer's precision and build-plate management. 🛠️ Model Features The helmet has been optimized to preserve the show's signature details even at a small scale. The surface texture highlights the "industrial" feel of 3D printing, reminiscent of raw Beskar steel. 💡 Printing Pro-Tip: Two Colors, One Build Plate! The best part about this model? You can achieve a clean two-tone look (Silver/Grey for the helmet and Black for the visor) without needing a multi-material system like an ACE. To get the cleanest finish and maximum efficiency, I recommend using the "Print By Object" feature. How to set it up in your slicer: Place both components (Helmet and Visor) on the build plate. Ensure there is enough clearance between them so the toolhead doesn't collide with the finished part. Navigate to the menu: OTHERS > SPECIAL MODE. Select: Print By Object from the dropdown menu. Technical Note: In this mode, the printer fully completes the first object before moving to the second. This drastically cuts down on travel time and completely eliminates stringing between colors, giving you a professional, clean result. ⚙️ Recommended Settings Material: PLA or PETG (Silver/Grey and Black). Layer Height: 0.12mm or 0.16mm for smoother curves on the dome. Infill: 15-20% (Gyroid recommended for strength). Supports: Not strictly necessary if your cooling is dialed in, but you can add minimal supports for the visor arch. Show off your makes! If you print one, please upload a photo—I’d love to see your versions in Beskar!