Mando 1 BW Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben Mando 1 BW Hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.8mm and the Actual Depth is 1.9mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic Jade White Transmission Distance: 5.7This print uses 2 unique filaments ***attached .3mf file prints the first 5 layers at 0.2mm then the rest at 0.04mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions: Start with Black At layer #28 (1.24mm) swap to Jade White for the rest. Check out my STAR WARS COLLECTION hereCheck out my Hueforge Display Collection here (Frames, Stands, Book Nooks) Check out my other models