Mando_Electro_Minocular

This thing was made with Tinkercad.

Update, I just replaced the stl file with one that has a lower facet count and fixed manifolds. please download the new file if you downloaded the previous file.
This model is my own design for an alternative Star Wars Electronic Binocular kit. It is a minocular based on my Micro-Electro-Binocular that you can find here: https://www.thingiverse.com/thing:2765967

All of the greebles are static. When constructed, this model is 66.25mm wide, 150.50mm from front to back, and 82.55mm tall. The front (objective lens) is designed so that you can add a piece of acrylic or glass before glueing it in place. The shaft is 25.5mm so you will need to subtract the width of your lens from the shaft before assembly. The ocular lens is simply a recessed square cutout (36mm x 22mm) so that you can add a backlit screen. The inside is hollow and there are front and back end caps screw points, so you can add a battery and simply unscrew one end to change out the ba