Thingiverse
Manicure vacuum cleaner
von DrevoX
12
Downloads
13
Likes
0
Makes
Materials:
1.Fan 12V 92x92 and 50x50 or 60x60 12V
2. Protective metal grill 120x120
3. The power connector in the case 2.1 × 5.5
4. The power supply unit 12V on 1 or 2 A with the socket 2.1х5.5
5. On / off button, for example kcd1-104 and mode switching (without zero position) kc3 or kcd1
6. Resistance 2W 50 Ohm (any from 30-70 Ohm is possible).
7. Optionally, the end microswitch is the simplest (most often green) with a roller, the smallest one. A piece of 12V LED strip. The tape is relevant only for translucent plastic, for example sbs-glass.
8. Wires, soldering supplies and a little patience.
9. The case for the model. If you can make a similar from improvised means, send me materials. Together we will review))
Model in STL and diagrams: https://vk.com/doc9149419_512222639
1.Fan 12V 92x92 and 50x50 or 60x60 12V
2. Protective metal grill 120x120
3. The power connector in the case 2.1 × 5.5
4. The power supply unit 12V on 1 or 2 A with the socket 2.1х5.5
5. On / off button, for example kcd1-104 and mode switching (without zero position) kc3 or kcd1
6. Resistance 2W 50 Ohm (any from 30-70 Ohm is possible).
7. Optionally, the end microswitch is the simplest (most often green) with a roller, the smallest one. A piece of 12V LED strip. The tape is relevant only for translucent plastic, for example sbs-glass.
8. Wires, soldering supplies and a little patience.
9. The case for the model. If you can make a similar from improvised means, send me materials. Together we will review))
Model in STL and diagrams: https://vk.com/doc9149419_512222639
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
