Thingiverse
Manual Counter
12
Downloads
6
Likes
0
Makes
A **manual counter** constituted of 13 support-less printable parts. A decagonal prism (with 17.5mm sides) is rotated to show on a window a number.
Things to print:
- X1 SUPPORT.STL
- X1 of each number (0 - 9.STL)
- X2 NUMBER_HOLDER.STL
It may be extended with further counters arranged side by side. To do so, the set of parts must be reprinted and two Ø 2.5mm or Ø 3mm stick inserted in the holes in the SUPPORT part.
How to assemble:
Place each number (in order) inside each slot of one NUMBER_HOLDER part. Then place the second NUMBER_HOLDER part on the other side, inserting each number in its corresponding slot.
No glueing is necessary: all pieces attach swiftly.
** To improve visual quality, it is recommended print/paint the numbers in a different colour.
Any issues or suggestions, please comment on the thing.
Things to print:
- X1 SUPPORT.STL
- X1 of each number (0 - 9.STL)
- X2 NUMBER_HOLDER.STL
It may be extended with further counters arranged side by side. To do so, the set of parts must be reprinted and two Ø 2.5mm or Ø 3mm stick inserted in the holes in the SUPPORT part.
How to assemble:
Place each number (in order) inside each slot of one NUMBER_HOLDER part. Then place the second NUMBER_HOLDER part on the other side, inserting each number in its corresponding slot.
No glueing is necessary: all pieces attach swiftly.
** To improve visual quality, it is recommended print/paint the numbers in a different colour.
Any issues or suggestions, please comment on the thing.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
