Mario Hueforge

Level up your display with this bold Mario Hueforge artwork, designed in a manga-inspired explosion style.This print shows Mario mid-action, unleashing fiery energy with a powerful punch. The sharp black-and-white comic shading contrasts against the striking orange flame swirls, giving the piece a dynamic “bursting off the page” effect. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mmFilaments Used: #000000 PLA+ Sunlu Black Transmission Distance: 0.6 #ffffff PLA+ Sunlu White Transmission Distance: 8.5 #d22332 PLA+ Sunlu Red Transmission Distance: 6This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to White At layer #21 (1.76mm) swap to Red for the rest. Remember if you want to resize then make sure you only change the X and Y (make sure the Z